How to Program an RCA Universal Remote

Tired of hunting around for a separate remote control whenever you want to change the channel, adjust the volume, or control a set-top box? An RCA universal remote might just be the answer to your prayers, letting you control your entire home theater setup from one all-encompassing clicker.

In this guide, we’ll show you how to program an RCA universal remote using the automatic code search method, since it’s a relatively quick and painless way to pair your remote with other devices. But before you start, be aware that this process can take some trial and error, so set aside a little time.

How to program your RCA universal remote

The first thing you’re going to want to do is make sure your new remote has batteries in it and the components and devices you want to be synced are all hooked up just how you want them.

All set? Now it’s time to link the remote control to the hardware. Here’s how:

1. Turn on the component or device you want to set up.
2. Press and release the button that corresponds with the component that you are programming. For example, if you want the remote to control your TV or Blu-ray player, hit and release the TV button or Blu-ray button. The remote’s On/off button will light up and should remain lit.
3. Now, simultaneously press and hold the Component button and the On/off button. The illuminated On/off button will turn off. After a moment, it should turn back on.
4. Release both buttons after the On/off button relights. It should remain on.
5. Now, press and release the Play button on the remote. If the component that you are programming does not turn off after five seconds, continue to hit the play button every five seconds until the component turns off.
6. Next press and release the Reverse button. Wait to see if the component turns back on, and press it every three seconds until it does.
7. Press and release the Stop button to save the programming for the device in the remote’s memory.
8. Repeat steps 1-7 for each additional device you wish to pair with your remote.

If you don’t press the buttons correctly, you might mess up the syncing process. This is the main reason why it might take some trial and error to get the remote set up. Struggling? Just reboot the hardware, pull the batteries out of the remote and pop them back in again, then start from step one.

RCA’s remotes are great if you’re looking for something simple and functional, but sometimes you’re looking for something more — something that can act as the total command center for your entire smart home. If that sounds more your speed, check out our list of the best universal remotes.

Editors’ Recommendations